ABB - V18311H362010100-511 I/P SIGNAL CONVERTER FOR STANDARD SIGNALS, INPUT 0-20MA, SPECIAL OUTPUT 1-18 PSI

I/P Signal Converter for Standard Signals, ATEX Rated

This ATEX rated TEIP11-PS I/P signal converter converts standard electrical signals, such as 4 to 20 mA to 0.2 to 1 bar (3 to 15 psi), operating as a connecting link between electrical, electronic, and pneumatic systems. The signal conversion process is akin to the patented force balance method.

Robust, this signal converter features a durable compact design and low weight polyester construction and can be subjected to loads up to 10 g with less than 1% effect on function. Vibration and shock resistant this converter can operate in a temperature range of -40 to 85 degrees C.

This signal converter housing is field mountable and suitable for installation on-site or in open areas using the supplied U-bolt, it has been designed for wall mounting and for 2 pipe connection with one PG11 cable gland. This durable signal converter requires only compressed air at 1.4 bar (20 psi) for the power supply.

I/P Signal Converter Features

• Signal converter for standard signals, with power stage
• Input signal 4 to 20 mA
• Output signal range 0.2 to 1 bar (3 to 15psi)
• Power supply = 0.3 % / 0.1 bar (1.5 psi) change in pressure
• Electrical connection 2-pole screw terminal for 2.5 mm2 (14 AWG) in housing
• PG 11 cable gland for cable entry
• Pneumatic connection ? NPT-threaded hole for supply air and output
• Field housing, Black polyester, IP54
• Operating temperature range –40 to 85 °C
• ATEX II 2 G Ex ia IIC T6 resp. T4 Gb